Cakery Bakery Cake Shop

Cakery Bakery Cake Shop





















Comments

Post a Comment

want to learn more or want any ebooks let me know

Popular posts from this blog

Process of Microcontrete Flooring

Image
Process of Microcontrete Flooring  Process On Tile/Marble Flooring  1 Sand The floor with Metal Grinder & Metal Diamond Wheel.  2 Clean the surface ensuring there is no dust on the surface  3 Apply 1 coat of Colortek Neogrip – F primer in thin layer – no dilution required  4 Let dry for 8 hrs  Application Process for Base & Topcoat   1. Apply 1st base coat of  base coat, polymer 3kgs, water 1 kgs, base coat filler 12  kgs mix it well until all lumps are dissolved and it becomes a smooth paste. (3:1  IS RATIO FOR POLUYMER AND WATER MIXING. 4:1 IS RATION FOR POLYMER  WATER MIX WITH POWDER  2. Apply in the thickness of 1-2 mm so that it gives you a coverage of 155 sqft  approx..  3. Let dry for 1 day  4. Sandin to be done by 30# grit resin pad – 8mm thick , Dcrf 7u – then sand with  60# grit resin pad – 3mm  5. Apply – 2 coats of polymer primer by diluting with water 1:1 ratio (1kgs polymer...
Read more

Shop Drawings (Before Work Commences)

What is a Shop Drawing? A shop drawing is a detailed execution drawing prepared by the contractor/vendor based on: Approved GFC / IFC drawings Specifications Site conditions Material finalization It translates design intent into buildable instructions. 👉 No work should start on site without approved shop drawings. --- Primary Intent of Shop Drawings (Before Work Commences) The shop drawing must clearly establish HOW, WHAT, WHERE, and WITH WHAT the work will be executed. 1. Design Intent Confirmation The drawing should: Match approved GFC / IFC drawings Respect design dimensions, levels, and finishes Reflect client + consultant approvals Highlight any deviation / value engineering clearly 📌 If design intent is unclear → RFI must be raised before submission. --- 2. Constructability & Execution Clarity The drawing must show: Exact dimensions (no assumptions) Levels (FFL, AFL, ceiling levels, slab levels) Fixing methodology Sectional details at critical junctions 📌 Anyone on site (f...
Read more

Why Concrete Post Is Required Around Metal Door Frame

Why Concrete Post Is Required Around Metal Door Frame 1. Structural Strength & Load Transfer Metal doors (fire doors / heavy-duty doors) impose: High self-weight Repeated dynamic loads due to opening/closing Closer impact loads A concrete/RCC post: Transfers loads directly to slab Prevents frame distortion Avoids long-term sagging of shutter 📌 Especially important when walls are AAC / gypsum / lightweight blocks. 2. Proper Fixing of Door Frame Concrete backing allows: Mechanical anchors / holdfasts to grip properly Avoids pull-out failure Maintains door squareness 📌 Chemical anchors perform poorly in AAC blocks without backing. 3. Fire & Safety Compliance (Critical for Fire Doors For fire-rated doors: Solid backing is mandatory for fire rating integrity Prevents early failure during fire exposure 📌 Most fire door manufacturers clearly state this requirement. 4. Alignment & Long-Term Performance Concrete post ensures: Frame remains plumb & level Door closer works effe...
Read more

Wallpaper Terminology: Drop Match, Flocked, and Straight Match Explained

  When selecting wallpaper, understanding key terms like  drop match ,  flocked , and  straight match  can help you achieve the perfect look for your space. Each term relates to the pattern and texture of the wallpaper and its installation method. Drop Match   Drop match  refers to the way a pattern needs to be aligned when installing wallpaper. In a drop match, the pattern is staggered rather than aligning in a straight line across adjacent strips. This type of match is typically used for larger or more complex patterns. -  Characteristics:  In a drop match, the design repeats diagonally. For example, if you align one strip at the top of the wall, the next strip might need to start halfway down to ensure that the pattern continues correctly. -  Types of Drop Match:    -  Half Drop Match:  The most common type, where the pattern drops down by half the length of the repeat on each strip. This requires careful meas...
Read more

Before starting the granite work, here are the steps to follow

Before starting the granite work, here are the steps to follow: 1.   Check the Plans:   Make sure the pattern and specifications match the approved drawings. 2.   Check for Straightness and Level:    Look for uniformity in the surface visually. Use tools like a spirit level or a straight edge to ensure the surface is flat and straight. 3.   Verify Tiled Surface:   Ensure the fresh tiles are level using tools like a spirit level or a string line. The surface needs to be properly leveled. 4.   Check Materials:    Confirm that the cement and sand have been tested before using them for tiling. 5.   Inspect Granite Pieces:    Ensure the granite pieces are not broken or cracked. If there are cracks near the edges, fill them with epoxy compound. 6.   Even Out Joints:   After filling the joints, use an angle grinder to make them even. 7.   Check for Hollow Spots: ...
Read more

Using CL 11 Self-Leveling Compound for Carpet Flooring: In-Depth Application Method

Image
Using CL 11 Self-Leveling Compound for Carpet Flooring: In-Depth Application Method For a recent project involving carpet installation, we used  CL 11 , a commercial-grade, self-leveling compound by  Ardex Endura . Self-leveling compounds are critical for creating smooth, even surfaces, ensuring the subfloor is free from imperfections that could affect the carpet’s performance and appearance. In this post, we’ll explore the step-by-step application method for  CL 11   and the reasons it’s an ideal choice for preparing floors in commercial spaces. Step-by-Step Application Method 1.  Surface Preparation  The first and arguably most important step in using a self-leveling compound like  CL 11  is preparing the surface: -  Cleaning the Subfloor : Remove all dirt, dust, debris, and loose materials from the surface. Even the smallest particles can prevent the compound from bonding effectively with the substrate, leading to potential failure. -...
Read more

Considerations for Recessed Skirting with Bottom Lines

Image
Considerations for Recessed Skirting with Bottom Lines 1.  Material Selection :    -  Durability : Opt for materials that are wear-resistant, such as aluminum, PVC, or stainless steel, particularly in high-traffic areas.    -  Finish : Choose a finish that complements the overall design and resists scratches or damage.    -  Moisture Resistance : Use water-resistant materials in moisture-prone areas (e.g., bathrooms, kitchens) to prevent warping or swelling. 2.  Installation Precision :    -  Leveling : Ensure the surface is perfectly level before installation to avoid uneven gaps.    -  Depth of Recess : The skirting should be recessed to the correct depth for a flush or slightly inset look with the wall, achieving a clean, modern appearance.    -  Corner Details : Pay close attention to internal and external corners, ensuring that joins are neat and seamless. 3.  Sealant and Waterp...
Read more